Traffic Lane Pretreatment, Spot Remover & Extraction Cleaner
3-n-1 Carpet Cleaner is a revolutionary concentrated carpet cleaner specially formulated to be 3 products in 1: 1) a Traffic Lane Pretreatment for Sprayer or Bonnet Cleaning Applications, 2) a Spot Remover and 3) an Extraction Cleaner. No need for separate presprays or spot removers. Just mix with water according to the directions for the desired application.
Each dilution safely cleans carpets without the use of foamy, harmful or sticky chemicals, thus eliminating the need for defoamer or additional rinsing agents. Unlike traditional carpet cleaning formulations, which promote resoiling, fiber untwisting, matting and longer drying times, our patented low residue technology suspends dirt and soils, reducing wear and damage to carpet appearance.
Recognized for Safer Chemistry by the U.S. EPA Design for the Environment
Safe for Use in All Deep Cleaning Machines
WoolSafe Approved by the Woolsafe Organization
Concentrate, makes up to 64 gallons
Dries 75% Faster
No Defoamer Required
1 US Gallon
DIRECTIONS FOR USE
For first time use, test for colorfastness in an inconspicuous area before use. Certain stains may cause permanent discoloration and may be impossible to remove. Results may vary with carpets previously cleaned with surfactant-based carpet cleaners.
WHERE TO USE
May be used with all types of liquid-extraction carpet cleaning equipment. May also be diluted for use as a traffic\lane prespray, bonnet cleaner and/or spot remover on watersafe carpet & upholstery.
HOW TO APPLY
Prior to cleaning, vacuum carpet thoroughly. Gently remove surface soils. Extract wet soils or blot up with a clean absorbent colorfast cloth. Try to keep as much of the soil as possible from penetrating into the carpet. Do not rub, as rubbing may alter the carpet texture.
Follow steps 1-3 for extraction cleaning.
Note: Mix fresh dilutions daily.
STEP 1. Traffic Lane Pretreatment for Sprayer or Bonnet Cleaning Applications: Dilute 8 oz. per gallon of water (1:16) to pretreat heavy traffic areas. Apply using an industrial sprayer or bonnet cleaning machine following manufacturer's instructions. Wait 5 minutes until soil loosens. Continue with Steps 2 and 3.
STEP 2. Spot Remover (as needed): Dilute 4 oz. per gallon of water (1:32) in spray bottle. Adjust spray nozzle to spray position. Spray directly onto soiled area. Wait 5 minutes until soil loosens. Blot with a clean colorfast towel or continue with extraction cleaning. Continue with Step 3.
STEP 3. Extraction Cleaner: Recommended dilution is 2 oz. per gallon of water (1:64). Follow manufacturer's directions for specific machine used.
Endorsement Disclaimer: EPA/DfE recognition does not constitute endorsement of this product. The Design for the Environment logo signifies that the formula for this product, as Clean Control Corporation has represented it to the EPA, contains ingredients with more positive health and environmental characteristics than conventional cleaners. EPA/DfE relies solely on Clean Control Corporation, its integrity and good faith, for information on the composition, ingredients, and attributes of this product. EPAIDfE has not independently identified, i.e., via chemical analysis, the ingredients in the product formula, nor evaluated any of Clean Control Corporation's non-ingredient claims. EPAIDfE expresses its judgment and professional opinion only as to the environmental and human health characteristics of the product, based on currently available information and scientific understanding.